Are You Eligible for These Sunshine State Travel Discounts?

If a Florida vacation is in your future, then find out if you’re eligible for these travel discounts in the Sunshine State. Although they are relatively easy to get, if you don’t know how or where to apply for them, you’ll totally miss out on some hefty savings.

Save at the Toll Booth

First and foremost, if you have a significant dexterity disability, you may be eligible for a free pass when it comes to Florida’s toll roads. The Disabled Toll Permit saves drivers both time and money; and although it’s often overlooked by visitors, it’s easy to obtain if you meet the minimum qualifications.

In order to qualify for a Disabled Toll Permit you must have:

A valid driver’s license
An upper limb or dexterity disability that prevents you from tossing coins into a toll booth basket
An adapted vehicle
The permit is valid for five years, and it can be used at manned toll booths throughout the state. Just show the toll booth operator your permit, and you’re good to go. For more information about the Disabled Toll Permit, call (800) 983-2435.

Once you receive your Disabled Toll Permit, you can also apply for a Sun Pass non-revenue mini transponder. There is a $4.95 fee for this electronic device that attaches to the windshield, and allows users to pass through unmanned toll booths at no charge.

For more information about a Sun Pass non-revenue mini transponder, call the Florida Commission for the Transportation Disadvantaged at (561) 488-5344.

State Park Savings

Additionally, veterans with a service-connected disability can receive a free military entrance pass, good for admission to all Florida State Parks. This lifetime pass is valid for park admission of up to eight people, except at Ellie Schiller Homosassa Springs Wildlife and Weeki Wachee Springs parks, where it’s good for up to two people.

Proof of identification, service-connected disability and honorable discharge are required. Acceptable documentation includes:

Valid driver’s license.
Documentation from Department of Defense or another appropriate agency of service-connected disability.
DD Form 214 showing honorable discharge.
The military entrance pass can only be obtained in person at any Florida State Park. Surviving Spouses and parents of US military members who have died in combat are also eligible for this pass.

Honorably discharged veterans can also receive a 25% discount on individual or family passes. These passes, which are valid for one year, are good for admission to all parks. A valid driver’s license and a DD Form 214 are required to get the discount; and like the military entrance pass, it can only be obtained in person.

And if you don’t qualify for either of those passes, but you plan to visit a number of Florida State Parks, you can still save some money by purchasing an individual or family annual pass. These passes are good for one year and they can be purchased at any state park entrance. The individual pass is priced at $60, while the family pass costs $120.

So plan ahead, bring your documentation, and rack up some savings on your next Florida vacation.

Posted in homepage | Comments Off on Are You Eligible for These Sunshine State Travel Discounts?

Useful Tips for Choosing an Airport Taxi Service

Getting to the airport isn’t the easiest thing and can be more difficult for those travelling with a lot of luggage and family members. One option to forget about the logistics of reaching the airport on time is to make use of an airport taxi service. This can remove a lot of the stress and worry, but is still important to schedule the pickup to match the specific needs.

Here are a few tips to make sure the airport taxi service provides a prompt and timely package:

Plan ahead

A simple step that can make things go smoothly is to book the taxi well in advance. Make sure there is enough time to easily reach the airport without feeling rushed. Try to calculate the travel distance and add an extra hour or more in the event of heavy traffic. Also, if travelling during busy travel times, such as bank holidays, it may be worth adding a little more time.

Pay attention to reputation

Investigate two or three different companies and aim to identify one that is highly rated for providing a reliable deal in the local area. Use online reviews to get an idea of the quality and reputable of a potential company. Find one that has the courteous drivers and appreciated for providing timely pickups and drops-offs.

Most companies are quite similar, so it helps to ring around and get a price for the ride to the airport. Many quote a flat fee to travel from home to the airport, as well as any other pickups on the way. Also, make sure the preferred company has the necessary licensing and credentials to offer this particular type of service.

Amount of space

One of the important things to check is the amount of space for passengers and luggage that the vehicle can accept. The vehicles can vary significantly in size with a standard vehicle able to accept a couple with minimal luggage to the larger vehicle that can easily take six or seven passengers in comfort.

For those travelling with a lot of bags, it may be necessary to ask for a larger vehicle.

Call before pickup

Even if the airport taxi service has been booked and reserved in advance, it still may be worth giving the company a call a few hours before it should arrive at the pickup address to make sure it will be arriving on time.

Posted in homepage | Comments Off on Useful Tips for Choosing an Airport Taxi Service

3D Scanning – What You Need To Know

3D scanning is a process of capturing digital information of object shape using equipment that has light or laser to measure distance between the object and the scanner. The non-destructive and non-contact scanning technology uses lines of laser light capturing the exact shape and size of the object. The fine details of even the smallest objects are captured and the process comes in handy in so many industries and fields. Some the areas that 3D scans are commonly used include automotive, manufacturing, medical and aerospace.

3D laser scanners capture thousands of points per second, allowing quick inspection of parts. It is a process that is ideally suited for measuring and inspecting contoured surfaces and also complex geometries that require lots of data for accurate description and where traditional measurement methods are impractical.

What are the advantages?

3D scanning has become very popular among business people in different fields. You can now easily find 3D scanning services for all needs you might have especially as far as accuracy and high quality productions are concerned. The popularity of the process is as a result of the many advantages it has over other traditional options. Some of the advantages that come with the process include:

1. Quick capture of all physical measurements of any given physical object; with 3D scanning, the size of the object does not matter.

2. Saves time when designing. The high definition details of objects make it possible for designers get it right with the first trail, hence saving time, even with productions that would have otherwise proved to be complex and time consuming.

3. Ensures perfect fit of parts with the first try. 3D has literally taken the guess work of production processes, especially for those dealing with prototypes and creating parts. The detailed information collected from an object is accurate and hence it is very rare to have parts that have any functional defects.

4. It captures engineering optimization that is necessary in manufactured parts. The process offers more confident to manufacturers in terms of meeting standards and any set objectives in the manufacturing process of parts. Using the scans, it has become even possible for manufacturers and designed to compare between designed and built models conditions so manufactured parts are top quality.

How does it help the design process?

3D scans are largely used in the design process of various products. Model scanning proves beneficial in the design process because:

· It increases effectiveness when working with shapes and parts that are complex

· It provides updated versions of CAD models that are outdated

· It makes it possible to replace missing parts or older parts

· It helps product designing so that someone else’s part can be accommodated

Which areas can in be used in?

3D scanning is very effective and has become a popular option in various fields including:

· Historical artifacts

· Prototyping or reverse engineering

· Entertainment industry for games, TV and movie productions

· Medical and dental

· Inspection

· Marine

· Construction and architecture

A 3D scan can prove highly beneficial in different sectors. If you do not have what it takes to enjoy the accuracy of 3D scans, you can get help from service providers who offer all kinds of scanning services.

Posted in homepage | Comments Off on 3D Scanning – What You Need To Know

How To Promote Your Business In Today’s Economy

Marketing a business is undoubtedly one of the most daunting tasks for any new entrepreneur. It’s one thing is to establish a business, but it is another thing to promote it. There are so many businesses, created by passionate people, that eventually collapse due to one reason – a lack of sales.

The purpose of any business is to sell something; either tangible or intangible. Tangible products are your tradition retail type of stores. Intangible products tend to be more service oriented. It is possible to have a combination business (such as painting; carpet installers, etc.). However, every entrepreneur is faced with the same problem of making their business known to the public in order to attract as many customers as possible.

There are many ways of promoting a business. The way you promote your business will basically depend on the type of industry your business belongs to. What works perfectly well for one business may not work for another type of business. Therefore, discretion is advised in adopting any of the steps listed below in promoting your own business:

1. Create a Website: Setting up a website is the surest way to make your business known by your potential customers. The first thing people do when trying to find out about your company is to search for it on Google. Your website has a way of creating a particular perception about your business. The more professional your website looks, the more professional your business will be perceived. The logical corollary is that you should link your social media channels back to your website.

It is not enough to just create a website, it is vitally important that you optimize your website by submitting it to major search engines like Google, Bing and Yahoo. This will enable your website to come up on those search engines whenever potential customers are searching for a product or service you offer.

2. Local Advertising: A business needs to be advertised to the people in the immediate area. A business owner may choose to advertise using billboards, posters, handbills, or any other affordable form of advertising. A company with a good budget may advertise with local newspapers, magazines, television and radio stations to attract a very large audience. Of course, this depends on the type of business you are in. An online only business might not want to try advertising on some of these outlets.

3. Conduct Social Media Campaigns: Advertising via social media is the cheapest and easiest way to reach out to your customers. Using Facebook, Twitter, Pinterest, Instagram, LinkedIn, etc. is free or relatively cheap. You have the ability to reach a larger audience than you could reach with local advertising.

There are over one billion active users on social media. Tapping into this huge resource will give you a greater chance of connecting with more people and introducing your business to them.

4. Email Marketing: Another good way of taking your business directly to your customers is by sending emails to your current or past customers anytime you have a new product. This is not a difficult task. You can do this by requesting for email addresses on your website or invoices. You can encourage your website visitors to give you their email address in exchange for a gift available for instant download to their email inbox.

5. Send another offer to customers immediately after a purchase: When a customer buys from you, introduce them to another product/service you offer. This is a great way of marketing your products to customers. Customers who buy your products have proven that they are able to pay for your products/services and that they have a level of trust with you. You should seize the opportunity to introduce other items or services you offer to them. Even though they may not buy right then, at least they know you are offering that service or item as well.

6. Ask your customers for referrals! You would be surprised at how quickly my business grew when I implemented a system of asking for referrals! I literally doubled my income in a matter of months. I also kept my schedule full of new appointments! Referrals could grow your business (online or traditional) exponentially! Think about it like this: It takes you (for example) 1000 leads to get ONE subscriber or appointment. Let’s assume you close 1 out of 3 subscribers or appointments and make them into customers. So it takes you 3000 leads to get ONE customer. If each customer provides you with three referrals, and the same ratio holds true (which it should double because your customers are not going to send you to people to make them mad – they will send you to people they know need your services), now each one of those purchased leads results in TWO sales! Then you ask that customer for three referrals – and the cycle keeps going.

These are just some of the ways in which I have built my business. Some of these techniques may not work in your business niche. If any of them do apply and you are not currently trying these ideas – give them a try! The results could, literally, catapult your business to the next level!

Posted in homepage | Comments Off on How To Promote Your Business In Today’s Economy

7 Tips to Prepare Your Vehicle for Winter

Windshield Wipers and Fluid – Fog, snow and rain will cut down your visibility in winter, causing you to use your wiper blades and washer fluid much more than normal. An antifreeze solution along with winter wiper blades will help to fight ice build-up. Keeping extra windshield washer solvent on hand is helpful too!

Battery – A thorough inspection of your battery, cables, terminals and fluid will help to make sure your car is ready for winter. The cold weather puts more stress on your battery. Many automotive parts stores will test your battery capacity free of charge.

Inspect Your Tires – If you’re not mounting winter tires on your vehicle, be sure to examine your current tires for remaining tread life, uneven wearing and cupping as well as checking the sidewalls for cuts and nicks to help you to know if your tires are ready for the harsh weather. The colder weather will also reduce the pressure within your tires, causing them to perform poorly in the snow. You should frequently check your tire pressures.

Coolant – Along with regulating the engine temperature, a vehicle’s coolant system is responsible for protecting your engine against corrosion. For the winter season you will want to make sure that you are using the right ratio of coolant to water in your system as well as using the right type of coolant for your car. If you are unsure, you can check the effectiveness of your coolant with a simple and inexpensive test found at any car parts store.

Ice scraper – Keep your ice scraper in your vehicle and always clean off your car completely, not just a little peephole in the windshield. You must be able to see all your surroundings, your side mirrors and through your back window. Snow on top of your car could slide down and cover your windshield while you are slowing down or fly off onto someone else’s vehicle while you are driving. In some states it is the law that your vehicle is clear of snow and ice.

Survival Kit – Especially during times of slick road conditions and below freezing temperatures, you will want to keep a survival kit in the car at all times in case of emergency. Some items to consider include extra gloves, boots and blankets, flares, tire chains, a flashlight and extra batteries, car charger or portable cellphone charger, and a whistle. Also check your spare tire and make sure that your car jack is in good, working condition.

Keep Your Gas Tank Above Half – If you get stuck or stranded, the car’s engine will be your only source of heat and you will want to be sure you have enough fuel to keep you warm. In some cases, it may be necessary to remove snow from behind the tailpipe and keep it unobstructed to prevent lethal gas from accumulating in the vehicle.

Posted in homepage | Comments Off on 7 Tips to Prepare Your Vehicle for Winter

What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

An electrical problem that doesn’t let your car start and leaves you stuck in a parking lot or some place away from the fix that’s needed is an unwanted problem we all do our best to avoid. So what can you do to lessen the possibility of a possible unwanted situation that involves an electrical system crash in your vehicle?

First of all make sure you spend double the money on a good car battery. A lead acid battery can cost between $75 to $125 dollars. The only reason liquid lead acid batteries are the most commonplace is liquid lead acid batteries were first developed in 1859 and they are the least expensive in today’s world of automotive engine starting sources. In 1971 the sealed liquid lead acid battery was created that made it maintenance friendly.

VRLA (valve regulated lead acid) batteries include gel and absorbed glass mate which are not liquid. Gel batteries are as the name applies which is a “Gel”. AGM batteries are silicate glass fibers mixed with boron and formed into a mat that holds the electrolyte. Non liquid gel batteries were created in the late 1920’s and lead to the creation of the “Absorbed Glass Mat” batteries in 1957. The AGM (absorbed glass mat) battery was put into production in 1972 but mostly used for military applications and non vehicle applications like boats, motor homes, motorcycles and electronics. Nowadays you see more AGM batteries becoming available for use in production cars. AGM (absorbed glass mat) batteries can cost from $160 to $250 but have more advantages over liquid lead acid batteries.

AGM batteries are basically used in applications where the use of the vehicle is only used now and again as in boats and recreational vehicles. The non use discharge rate is much lower in non use applications than liquid lead acid batteries. The charge rate is much faster also. Some automotive manufacturers are installing AGM batteries as their standard new car power source because of today’s higher vehicle power consumption. BMW right now is known to be the first to install AGM batteries in their 2007 models because of computer functions and braking.

AGM batteries are much better than liquid lead acid batteries but the downside of AGM batteries is you don’t overcharge them. They will charge faster with a normal output alternator up to 14.5 volts and a high output alternator is not needed. When an AGM battery is used in a non use vehicle a solar panel is recommended with a trickle charge. AGM batteries will go bad if charged over 14.5 volts. Most problems with charging AGM’s are in sports vehicles due to the rough environment they are used in. Toss away your old plug in garage battery charger and get a new one that maintains “Voltage” instead of amps. An AGM battery charger will sense a very low voltage in the battery and will start the recharge whereas an old charger does not sense low voltage and will not charge the battery.

These batteries are used in military vehicles that sit in storage for many years and start up after years in storage with no problem. I’ve read stories online where people have left their AGM batteries sitting in their garage for many years and they have retained their full charge. I use AGM batteries in my vehicles and disconnect the negative cable in the one that I don’t use that often anymore and it starts right up when I run the engine occasionally. I’ve read complaints about the AGM failing often but that’s only because of bad practices with them or using them in systems where the charging exceeds the recommended level. You can leave these batteries sitting for long periods of time without charging them but it’s recommended that a solar panel with an extremely low trickle charge be used when not in use. Again I will say from my own experiences is to disconnect the negative cable to the battery when not in use.

The AGM vs Gel and the wet cell? The AGM has thicker plates that tend to not warp that easily during deep discharges and resist sulfur buildup’s that destroy a wet cell battery. Wet cell batteries usually go bad after 4 years if they make it that length of time. The life expectancy of the AGM battery can be up to 10 years if not overcharged. Gel cell batteries are great for sports vehicles but tend to charge slower.

The Winner Is, “Absorbed Glass Mat” if you learn how to take care of them properly.

Posted in homepage | Comments Off on What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

Let Your Car Breathe Freely With Routine Air Filter Replacement

In a similar way to living creatures, vehicles also need to be able to freely “breathe” clean air. Of course cars do not have lungs, so when we say “breathe”, what we really mean is “filter air.” Your vehicle’s cabin air filters should be inspected and serviced on a routine basis to ensure perfectly clean and unobstructed “breathing.” For permanent filters, a professional car mechanic will clean them, dry them, and replace them as needed. For disposable ones. A simple inspection and replacement is all it takes! Continue reading to learn more about the importance of clean automotive air filters.

Defense Against Airborne Contaminants

Your vehicle’s air filters play an important role in terms of interior cabin air quality and comfort. But it also plays a significant role in how your vehicle operates. Clogged or defective filters can cause a decrease in engine performance and capacity, as well as, lose their ability to protect you against harmful airborne contaminants. You see, dirt, oil, and other harmful contaminants are trapped in air filters, and after sometime, they accumulate to mass amounts, causing the filters to lose their value. And when the filters become too saturated, they cannot trap anymore contaminants. As a result, these contaminants enter the engine and damage pistons, piston rings and bearings, cylinders, cylinder walls, and more. This causes the engine to then lose power. For fuel injected cars, air filters protect the air flow sensor from contamination.

As for interior air quality and comfort, dirty filterings can jeopardize the cabin environment. Without anything between you and airborne contaminants, you are left to suffer from dirty indoor air. This results in musty odors, stuffiness, allergy-agitation, and more. When it comes to cabin air filters, try to have them inspected and replaced every 12,000 to 15,000 miles. If you are a frequent driver or frequently drive long distances, decrease this rule to every 10,000 to 12,000 miles.

Although such an important part of car safety and maintenance, air filter replacement is often overlooked. Be sure to talk to your trusted car mechanic about recommended factory scheduled maintenance for your vehicle. They have the knowledge and advanced diagnostic systems to provide accurate and effective service for your exact make and model car or truck. They can then provide you with a trusted schedule that you can continue to use and refer to for years to come!

Call Main Street Auto Tech at 317-881-7220 for car filter replacement in Greenwood, Indiana. They are ASE certified car mechanics that offer a wide range of automotive services for all make and model vehicles, domestic or foreign. Ask them about their auto repair coupons and discounts too! Call 317-881-7220 to request a free estimate for Greenwood car maintenance, today.

Posted in homepage | Comments Off on Let Your Car Breathe Freely With Routine Air Filter Replacement

The Best Places For Destination Weddings

Wedding bells are ringing everywhere! If you’re someone who is planning to get married on the coming year then you need to read what we have to say before you make any further wedding plans. For all us, the day we get married is probably the most important day of our lives and we want to make sure it is arranged that way as well. To do that, you don’t necessarily have to throw a grand wedding at the most expensive place around. A simple and much cheaper alternative is to get married at one of the following locations which are known for their exotic beauty and their services all of which are at your beck and call for very economical prices. And before you move on, here’s a tip – if you’re planning a destination wedding make sure you book flight tickets well in advance!

1. Belize:
This place is on top of our list of wedding destinations and the reason for that is because it offers so much for so little. The place has some extremely beautiful destinations and rainforests as well as old Mayan ruins. Oh and let’s not forget that this place is also home to the second largest barrier reef in the world. The best thing about this place is that instead of being filled with expensive resorts like most of the other exotic travel locations, it has a lot of economical lodges and the sea food here is divine yet cheap too. So you can even host a wedding feast filled with exotic sea food but still save a lot in your pocket.

2. Jamaica:
The best thing about Jamaica is that it provides you with a choice of two very different and equally beautiful locations. You can choose to get married on the white sandy beaches or near the Rocky Mountains depending on what you like. Or maybe you could get married on the beach and throw the dinner or reception in the mountains to get the best of both worlds. And on top of that, the arrangements here are really cheap as compared to other travel destinations.

3. Vermont:
This small collection of beautiful landscapes and homey villages is probably the best travel destination to get married in. The scenic beauty here gives you the perfect backdrop to take your wedding vows and have a fun pre or post wedding shoot too. There are a lot of cozy and warm bed and baths here as well as halls where you can hold your wedding party. And the best part of this is that you can get all of this at very very economical prices.

Now that you know the best places to get married in, we suggest that you start planning for your perfect destination wedding and make sure you book flight tickets well before time so as to avoid any unnecessary delays and problems in your plans! All the best! Cheers to new beginnings!

Posted in homepage | Comments Off on The Best Places For Destination Weddings

5 Benefits Of Using Security Tags

If you go to most of big retailers, you will see that they have electronically tagged their expensive goods. It’s possible to tag all the products including beauty products and alcohol. Usually, retail stores use security tags to secure items that are most commonly stolen. As a matter of fact, security tags offer a simple solution for businesses to secure their stock. Read on to know more about it.

How security tags work

In simple words, security tags are designed to send an alert when products at a store are moved through a security barrier. These tags are put on the product packages. When a shoplifter tries to steal the package and passes through the barrier, the tag will turn on the alarm sending an alert to the security.

The staff at the store can detach or deactivate the tags for their customers. So, their genuine customers won’t face any embarrassing situation. The fact of the matter is that these tags prevent shoplifters from lifting stuff from retail stores. As said before, these tags can be used on any product sold at the stores. Given below are 5 major benefits of these tags.

5 Great Benefits of Tags for security

1. Affordable

Since security tags are sold in bulk, you can get discount when buying them. While they may cost you a good amount of money, you will save a great deal of money in the long run. The protection you will get is worth the investment. That’s the reason the product is an effective solution for small as well as large businesses.

2. Ease of use

The great thing about the product is that it is very easy to use. This means that you can use them on a wide range of products. While they are easy to apply, they can’t be removed without a special device called a deactivator. So, the shoplifters won’t be able to remove them.

3. Easy deactivation

With a deactivator, it’s easy to remove the tags in a few seconds. So, your customers don’t need to wait for the tags to be removed before they leave your store. Unlike other gadgets, security tags are not complex items.

4. Peace of mind

With security tags on each product at a store, the staff and customers will have a peace of mind. All the staff at a store will be able to focus on their jobs as they will have peace of mind that any attempt to steal the products will be detected. Moreover, the customers will also be satisfied that they are in a safe store.

5. Reliability

Security tags are very reliable as they can’t be removed without the special device known as the deactivator. Once the deactivator is removed, the tag won’t set the alarm off when the customer will pass it through the security barrier. So, the devices are 100% reliable. There will be no surprises.

So, if you run a store and want to improve the security system at your store, you may want to consider installing tags.

Posted in homepage | Comments Off on 5 Benefits Of Using Security Tags

The Benefits of Network Marketing – 3 Top Reasons Why Network Marketing Rocks

Let’s face it, there are a lot of mixed feelings when it comes to network marketing. Some people love it and some people hate it but in this article, we are going to talk about the 3 top reasons network marketing rocks.

Time Freedom

When you are a MLM professional, you are able to set your own hours. You can work when you want to work and shut your cell phone off whenever you choose not to work. You can spend time working on the beach or in any part of the world that you want since you have the ability to travel and still have your business.

Residual Income

Residual income is work you do something for once and then you just keep getting paid over and over again. Whenever you get team members and customers that are buying and selling products every single month, you have residual income and that is very powerful.

Leverage

Being able to build a team in network marketing enables you to build leverage. When one of your team members is working and you aren’t there, that is leverage. Being able to have something done when you are not there is what the goal is so the more leaders you help develop, the better.

As you can tell, network marketing has many great benefits and there are more that could be listed but these are the top three that always get me excited. Building a network marketing business to the top may not be easy but the rewards are plentiful. It is possible for anyone to be able to achieve their dreams with this amazing profession.

Posted in homepage | Comments Off on The Benefits of Network Marketing – 3 Top Reasons Why Network Marketing Rocks